User's Manual

PTZ Control
Press the “PTZ” soft button to select the remote head you would like to control
with the trackball.
Press the “PTZ” soft button to enable PTZ control via the trackball.
With “PTZ” selected, the camera buttons assigned to each remote head will illuminate. Simply
select the button corresponding to the camera you would like to use and move the trackball to
adjust pan and tilt.
Trackball PTZ controls are very intuitive. Simply roll the trackball in the direction you would like
to move the camera. Roll left or right to pan, and up and down to tilt. The controls are sensitive
to the speed of movement of the trackball, letting you ease in and out of your camera moves.
The amount of sensitivity may vary between remote heads.
Use the trackball to pan and tilt the selected PTZ head.
If your remote head has zoom and focus capabilities, you can use the “zoom” and “focus” knobs
to the left of the trackball to control them.
Turn the “zoom” knob left to zoom out, and right to zoom in on compatible remote heads.
Addressing Cameras using theCall Button
Pressing the call button flashes the tally lights on all Blackmagic Design cameras connected to
your switcher via their return SDI feed. This lets you send out a visual ‘standby’ indicator to all
camera operators, which is helpful for when you are about start your live production.
99Using ATEM Television StudioPro Switchers