User's Manual

The multi view also includes a tally feature, so if any of the sources in the multi view are used in
a layer on the program or preview outputs, they will be highlighted red or green. A white border
means your source is not currently switched to the preview or program output. Ared border
indicates the source is switched to the program output and a green border indicates a source is
selected on the preview output.
The preview window on the multi view output features safe area markers so you can make sure
your program will look great on any monitor. In HD, the outer border represents the 16:9
graphics safe area and the inner border represents the 4:3 graphics safe area. In SD, the single
border represents the action safe area. Turn the markers on or off by clicking the safe area
markers icon in the preview window.
You can also change the orientation of the multi view windows by selecting one of four different
layouts using the camera layout icons at the top of the multi view settings window.
Customizing the Multi View
Labels Settings
The video input settings are used to select the inputs and change labels. On other ATEM
switcher models, the video inputs can select between different video sources, such as
HDMI or SDI.
Label settings
58Using ATEM Software Control