User's Manual

ATEM Television Studio HD
ATEM Television Studio Pro HD ATEM Television Studio Pro 4K
720p50 1080p25
625i50 PAL 16:9 1080p24
525i59.94 NTSC 16:9 1080p23.98
625i50 PAL 4:3 1080i59.94
525i59.94 NTSC 4:3 1080i50
– 720p59.94
– 720p50
To set the video standard, select the format you want to use from the 'set video standard to'
drop down menu, and then click on the set button. Any time the video standard is changed,
the switcher will remove any frames you have loaded into the media pool, so it's best to set the
video standard before loading any media.
Set Video Standard
Setting the Multi View Video Standard
If you need to output the multi view using interlaced or progressive formats, you can change the
output using the 'set multi view standard to' drop down menu. The setting options are
determined by the video standard set for the switcher.
For example, if the switcher video standard is set to 1080p59.94, you can output the multi view
using the same standard, or choose from 1080i59.94 or 1080p29.97.
Set 3G-SDI Output Level
This setting is only used when connected to an ATEM switcher that supports both level A and B
3G-SDI output.
Camera Control
Your switcher’s auxiliary output can be set to monitor the ATEM camera control output. Set the
aux output by selecting ‘auxiliary 1’ from the camera control drop down menu. If you want to
change the name of the auxiliary output to easily identify it, you can change the output label in
the 'labels' settings.
You can monitor your adjustments on each camera by
routing camera control to your switcher's auxiliary output
56Using ATEM Software Control