User's Manual

4 If you have elected to use a fixed IP address, you now need to set this IP address by
adjusting the corresponding soft control knobs for each field of the IP address.
You can also use the numeric keypad. Changing this IP address may cause the panel
to lose communication.
5 If the subnet mask and gateway address need to be set, then press the right arrow
button in the system control buttons to progress through each setting menu, and use
the knobs or the numeric keypad to edit. If at any time you want to cancel the changes,
press ‘undo’.
6 When you are happy with your settings, press the ‘save changes’ soft button to confirm.
When you are happy with your network settings,
press the ‘save changes’ button to confirm them
Using ATEM Software Control
ATEM Software Control is included with your ATEM switcher, and allows you to control your
switcher in a similar way to a full hardware control panel. However instead of menu buttons,
ituses a range of palettes on the right side that shows you all processing features of your
ATEM switcher and allows settings to be easily made.
You can also use ATEM Software Control to configure your switcher settings as well as upload
graphics and manage the media pool.
Preference Settings
The preferences settings are arranged as ‘general’ preferences and ‘mapping’ preferences.
Thegeneral preferences contain network settings, transition control and language
selection options.
General Preferences
ATEM Software Control can be set to display in English, German, Spanish, French, Italian,
Japanese, Korean, Portuguese, Russian, Turkish and simplified Chinese languages.
When running ATEM Software Control for the first time after installation, a setup dialog box will
prompt you to set the language for the software, but you can change the language of the
software at any time.
30Using ATEM Software Control