User's Manual

Dip Transitions
A DIP is similar to a mix in that it is a gradual transition that transitions from one source to
another. However, a dip transition gradually mixes through a third source, the dip source.
For example, the dip transition can be used for a transition that calls for a white flash or a
transition that quickly flashes the sponsor logo. The length of the dip transition and the dip
source can be customized.
Program output for a dip transition.
Dip Transition Settings
To perform a dip transition on ATEM Television Studio HD:
1 Press a source button on the control panel for the video source that you want on the
program output. The button will illuminate green.
2 In the LCD transitions settings, select ‘dip’ and press the ‘menu’ button to return to
the transitions settings. Set the transition rate and change the dip source if you want
to. You can use any of the switcher sources, including cameras, Media players or
background colors.
3 Press the menu button to step back through the menus to the master output screen.
4 Perform the transition as an auto transition by pressing the auto button on the
front panel.
Change the dip source in the transitions LCD menu.
To perform a dip transition on an ATEM Television Studio Pro model switcher:
1 On the preview bus, select the video source that you want on the program output.
2 Press the dip button to select the dip transition type.
111Operating your ATEM Switcher