User's Manual
The trim function lets you adjust your in and out points frame by frame. If you want to move
either of your timecode points by individual frames, you can do this by using the ‘trim’ buttons.
To trim your timecode frame by frame:
Press the ‘in’ button and then either trim ‘-’ or trim’+’ to move the in point backwards
orforwards one frame at a time.
PLAYBACK
RECORD
TRIM PLAYER
REF
SERVO
REMOTE
RECORDER
HOURS MINUTES SECONDS FRAMES
IN
INPUT PREROLL SKIP REC SKIP
SHUTTLE JOG POSITION
EDIT EJECT REW PLAY F FWD STOP
OUT
ENTRY
DELETE
M
M
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1
2
Move your in point forward by a frame by pressing
the ‘in’ button and the trim ‘+’ button
Once your ‘in’ point is set, you can repeat the above steps to locate the ‘out’ point using the
search dial.
Using the Transport Controls
You can also use the transport controls on the HyperDeck Extreme Control to navigate to your
in andout points. The two rows of transport controls feature buttons commonly found on
traditional broadcast decks and will be familiar to you. These buttons include ‘preroll’, ‘record’,
‘edit’, ‘eject’, ‘rewind’, ‘play’, ‘fast fwd’ and ‘stop’.
‘Skip’ reverse and ‘skip’ forwards buttons operate like previous and next buttons on file based
decks such as the HyperDeck Studio Mini, so you can quickly navigate from clip to clip.
PLAYBACK
RECORD
TRIM PLAYER
REF
SERVO
REMOTE
RECORDER
HOURS MINUTES SECONDS FRAMES
IN
INPUT PREROLL SKIP REC SKIP
SHUTTLE JOG POSITION
EDIT EJECT REW PLAY F FWD STOP
OUT
ENTRY
DELETE
M
M
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1
2
Using REW, PLAY, F FWD and STOP buttons on the front panel let you
quickly control your video on file and tape based decks.
To locate your timecode point, make sure your ‘player’ has reference and is in remote, then on
the controller:
1 Press the ‘recorder’ button to control the deck you have previously selected as your
record deck.
2 Press the REW to F FWD buttons to rewind or fast forward.
3 Once you have reached your timecode, press STOP to stop playback and define select
your in point by pressing the ‘entry’ and ‘in’ buttons together.
The HyperDeck Extreme Control also features other transport controls for file based decks.
Skip forward and skip back
If you are using a file based deck for record or playback, such as the HyperDeck Extreme 8K
HDR, you can use the ‘skip’ forward and reverse buttons. Press ‘skip’ reverse once to skip back
to the first frame of the current clip. Press ‘skip’ forward and you will skip forward to the first
frame of the next clip.
62HyperDeck Extreme Control Workflow