User's Manual

Full reverse Stop position
Forward Full speed forward
Light indicators above the search
dialwill indicate the direction and
speed you are traveling inshuttle mode.
Jog
Jog mode offers precise control over tape and drive based decks with a slower speed
compared to ‘shuttle’ mode. Press the jog button to select jog mode and the button will
illuminate. The search dial will now respond to how fast you rotate the dial. The dial will
spin freely without any clutch engaging.
Jog backward Jog forward
Light indicators will display the
direction of your search dial position.
TIP You may find you use two or three search dial modes to find your
timecode point. Use ‘shuttle’ mode as a quick way to navigate to the area
ofinterest, then change to jog mode for more precision.
Position
Position mode lets your navigate to your area of interest based on the duration of the
tape or timeline you are viewing. On a traditional tape based broadcast deck, ‘position’
indicates whether you are near the start or end of a recorded tape. For a HyperDeck,
‘position’ indicates your location relevant to the timeline position.
The light indicators when in ‘position’ mode will indicate the position relative to the start
middle and end.
60HyperDeck Extreme Control Workflow