Manualshelf

User's Manual

ManualsBrandsBlackmagic Design ManualsProfessional VideoHyperDeck Extreme Control
51525354555657585960
TIP HyperDeck Studio models and HyperDeck Extreme 8K HDR have a
REM button on the front panel to turn on remote mode. If you are using a
HyperDeck Studio Mini, remote mode can be enabled via the control panel
display menu on the front panel.
Testing Control
Once your playback and record decks have the remote button enabled, you can then use the
search dial and transport controls to test control and navigate to the location on your deck.
1 To control the playback deck, press the ‘player’ button. The timecode display on the
controller will now update to reflect the timecode on your deck.
2 Turn the search dial to the right or left, or press the forward or rewind buttons.
The timecode will update to reflect the forward or reverse motion.
3 To control the record deck, press ‘recorder’. The timecode and status indicators will
now match those of your HyperDeck recorder. Turn the search dial to confirm control
or press one of the transport buttons.
Now that you have established control over your HyperDeck recorder and Digi Beta deck,
youcan use the search dial or transport buttons to locate your ‘in’ and ‘out’ points.
Finding your Timecode Point using the Search Dial
The HyperDeck Extreme Control search dial has three modes; shuttle, jog and position.
The selected button will illuminate when you choose your mode. The search direction
indicators will illuminate to show you which direction your are moving and at what speed.
Onceyou are spooled to your desired location, you can set your in and out points.
PLAYBACK
RECORD
TRIM PLAYER
REF
SERVO
REMOTE
RECORDER
HOURS MINUTES SECONDS FRAMES
IN
INPUT PREROLL SKIP REC SKIP
SHUTTLE JOG POSITION
EDIT EJECT REW PLAY F FWD STOP
OUT
ENTRY
DELETE
M
M
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Shuttle
When you are in shuttle mode you can turn the dial to the left or right up to a maximum
of 120 degrees to rewind or fast forward your tape or file based media. The further you
turn the dial, the faster the media will spool until the clutch engages to let you know you
are at full speed. To stop spooling, return the dial to the center position. You will feel a
tap on the knob when you reach the center.
59HyperDeck Extreme Control Workflow