User's Manual

To update the internal software using Windows:
1 Download and unzip Blackmagic Video Assist Setup.
2 You should see a Blackmagic Video Assist Setup folder containing this manual and
the Blackmagic Video Assist Setup installer. Double-click the installer and follow the
onscreen prompts to complete the installation.
3 After installing the latest Blackmagic Video Assist Setup, connect a USB type C cable
from your video assist to your computer.
4 Launch Blackmagic Video Assist Setup and follow any onscreen prompt to update the
internal software. If no prompt appears, the internal software is up to date and there is
nothing further you need to do.
Underside Panel
Blackmagic Video Assist has a USB-C port on the base of the
unit for software updates and for connecting external drives
To update the internal software on your video assist, pluginto your computer via the USB
port, then download and launch thelatest Blackmagic Video Assist Setup. Follow any on
screen prompts. Ifno prompt appears, your internal software is already up to date.
52Storage Media