User's Manual

Project name
Displays your current project name. Tap the pencil icon to change the project name.
Director
Displays the director’s name for the current project. Tap the pencil icon to change the
director name.
Camera
Displays a single letter camera index. Tap the pencil icon to change the camera index.
Camera Operator
Displays the camera operator. Tap the pencil icon to change the camera operator name.
Lens Data
The ‘lens data’ menu contains the following information:
The ‘lens data’ menu showing information that has been manually entered
Lens Type
Shows the lens model. Tap this setting to enter the data manually. The video assist has an
internal database stored for many commonly used lenses, so it will suggest names automatically
as you type. This makes entering data much faster.
Iris
Shows the iris aperture setting at the start of your clip. This information can be displayed in f- or
T-stops depending on the lens used. Tap this setting to enter data.
Focal length
Shows the focal length setting of the lens at the start of the recorded clip and is shown in
millimeters. Tap this setting to enter the focal length manually.
Distance
Shows the focus distance settings of the lens for the recorded clip in millimeters. Tap to enter
this data manually.
Filter
Shows the current lens filters used. Tap this setting to enter data manually. You can make
multiple entries separated by commas.
40Entering Metadata