User's Manual

Input

Repeatedly pressing the INPUT button cycles through the SDI, AES/EBU, Analog and

HiFiinputs so you can select which video and audio equipment you wish to monitor.

The selected audio input can be listened to via the built in speakers, plus you can monitor the

audio on CH 1 & 2 of the HDMI output.

NOTE The HDMI output will display black video when the analog, AES/EBU or

HiFiinputs are selected. The SDI Loop output always outputs the video and audio

connected to the SDI input.

Mute

This button mutes Blackmagic Audio Monitor’s control panel speakers and headphones.

Mutingthe audio will not affect your audio input and will only affect the speakers and

headphones output. Pressing the MUTE button again will restore audio to the control panel

speakers or headphones. Alternatively, increasing the volume will also restore audio.

Volume

This knob adjusts the volume for the speakers or headphones independently. Volume level is

displayed on the built in LCD. When headphones are connected, Blackmagic Audio Monitor’s

speakers will mute and audio is outputted via headphones. Volume can easily be adjusted up

or down by turning the volume knob clockwise or counterclockwise.

-45 -30 -20 -10 -3 +3

SOLO

LEFT

SOLO

RIGHT

CH CH

INPUT

SDI 1080PsF/30 Ch 1&2

The volume level is displayed on the control panel LCD.

9Using Blackmagic Audio Monitor