User's Manual

A
Holding the Blackmagic Dolby decoder
module by the top edges, align the
module’s keyway to the SIMM slot key
and gently insert the module until it is
firmly seated.
B
Lean the Blackmagic Dolby
decoder module towards the rear
of the chassis until the metal clips
fasten to both sides
Confirming Dolby Audio
When Dolby encoded audio is detected by Blackmagic Audio Monitor the Dolby logo will
appear on the top right corner of the control panel LCD. You can monitor 4 pairs of Dolby
surround channels by pressing the control panel channel up and down buttons.
15Installing the optional Blackmagic Dolby® Decoder Module