User's Manual

Blackmagic Teranex Setup lets you adjust settings such
as HDMI instant lock to instantly resync the video signal
when changing or routing sources, load 3D LUT files,
change the XLR analog audio output levels, and more.
Teranex Mini Smart Panel Settings
If you have installed the optional Teranex Mini Smart Panel on your SDI to HDMI 12G converter,
the following menus will be available – ‘video,’ ‘audio,’ and ‘network.’ The settings available in
these menus are identical to those detailed in the ‘Blackmagic Teranex Setup settings’ section
above. For more information on changing settings using the Teranex Mini Smart Panel, refer to
the ‘changing settings’ section.
Teranex Mini Smart Panel gives you access to
the same settings as Blackmagic Teranex Setup.
Teranex Mini – SDI to HDMI 12G Block Diagram
SDI In
Customizable
Video Processor
and 33pt 3D LUT
Equalizer,
Re-Clocker and
10 bit De-Serializer
SDI Audio
De-Embedder
Central Processor
and Firmware
Audio Digital to
Analog with
Balanced Output
AES/EBU
Audio Formatter
Automatic
SD/HD/6G/12G-SDI
Cable Driver
HDMI Video and
Audio Formatter
and Instant Lock
Mini Switches
USB
Analog or AES/EBU
Audio Out Switch
Left Analog Out
or AES/EBU
1+2 Out
HDMI Out
Loop SDI Out
Input automatically
detects between
SD/HD/6G/12G-SDI
Ethernet
with Power
Right Analog Out
or AES/EBU 3+4
Out or Timecode
42Teranex Mini – SDI to HDMI 12G