User's Manual

To mount and connect URSA Mini SSD Recorder:
1 2
Power off URSA Mini Pro by moving the ‘power’
switch to ‘off’. Power off URSA Mini by pressing
and releasing the ‘power’ button.
Unmount any battery plates currently fittedto
your camera. For more information on mounting
and unmounting battery plates, see the section
'mountingbatteries' in this manual.
3
4
If no battery was fitted to your camera,
youmayneed to remove the cover over the
molex socket on your camera's rear panel.
Use a philipshead screwdriver to remove the
fourM3screws holding the cover in place.
Attach URSA Mini SSD Recorder’s
mountingbracket using 6 x T10 torx screws.
5 6
Plug the molex connector on URSA Mini
SSDRecorder into the molex socket on
yourcamera’s rear panel.
Attach URSA Mini SSD Recorder to the mounting
bracket using 2 x T10 torx screws onthe left and
right side of the brackets.
287URSA Mini SSD Recorder