User's Manual

Attaching the EF Mount
1 2
Place Blackmagic URSA Mini Pro vertically on a
solid, clean bench top toensure that the mount
can be inserted vertically. If changing from
the PLto the EFmount, ensure that you have
removed thePLbaffle before inserting the EF
mount.
Carefully place the BlackmagicURSAMiniPro
EF lens mount onto the camerabody ensuring
thered dot is at the 12o’clock position.
3 4
1
3
4
2
Using a 2mm Hex driver or torque wrench set to
0.45Nm, loosely turn the four mounting screws
until nitialcontact is made with the shoulder of the
lensmount.
Confirm the lens mount is level and correctly
aligned, then tighten the screws in the order
shown here to an even pressure without over-
tightening the screws.
NOTE When removing the EF mount, simply follow the instructions in reverse order
from step 4 to step 1.
218Interchangeable Lens Mount