User's Manual

Attaching the F Mount
1
2
Place Blackmagic URSA Mini Pro vertically on a
solid, clean bench top to ensure the mount can
be attached vertically. If changing from the PL to
the Fmount, ensure that you have removed the
PLbaffle before inserting the F mount.
Carefully place the Blackmagic URSAMiniPro
F mount onto the camera bodyensuring the
white dot is atthe2o’clock position.
3 4
1 3
4 2
Using a 2mm Hex driver or torque wrench set to
0.45Nm, loosely turn the four mounting screws
until initial contact is made with the shoulder of
the lensmount.
Confirm the lens mount is level and correctly
aligned, then tighten the screws in the order
shown here to an even pressure without over-
tightening the screws.
NOTE When removing the F mount, simply follow the instructions in reverse order
from step 4 to step 1.
216Interchangeable Lens Mount