User's Manual

Blackmagic URSA Mini Pro PL Mount
Attaching the PL mount to your URSA Mini Pro lets you use high end precision cinemalenses
for feature film and television production.
The PL mount kit includes:
1 x PL mount
The PL mount is shipped with a protective dust cap.
1 x Shim set
The shim set includes the following thicknesses:
0.50mm
0.30mm
0.20mm
0.18mm
0.15mm
0.12mm
0.10mm
0.05mm
0.025mm
1 x PL baffle
The PL mount baffle helps to control and direct the light entering
the sensor.
1 x Baffle tool
Use the PL baffle tool to tighten the baffle in your camera.
5 x 2mm Hex M2.5 x 22mm mount screws
The five M2.5 x 22mm Hexscrews are exclusive to the PLmount
so you can keep the screws together with the respective mount.
The PL mount kit also comes with a full spare sets of screws in
case the originals are misplaced.
Tools Required
When attaching the PL mount, you will need a 2mm Hex driver. While it’s not absolutely
required, we recommend using a torque wrench able to accurately set a maximum torque
of0.45Nm to reduce the potential of over tightening the screws.
2mm Hex driver
212Interchangeable Lens Mount