User Manual

ManualsBrandsBlackmagic Design ManualsMixer and Video ControllerAtem Sdi Extreme Iso - VIDEO PRODUCTION MIXER SWITCHER 8 SDI INPUTS

Table Of Contents

Getting Started
- Plugging in Power
- Plugging in Video Sources
- Plugging in a Monitor and Testing Inputs
- Connect a Microphone
- Connecting to a Computer
- Setting the Webcam Source
Switching your Production
- Switching Sources using a Cut
- Switching Sources using an Auto Transition
- Transition Styles and DVEs
- Controlling Audio
- Using Picture in Picture
- Using the Upstream Keyer
- Fade to Black
- Using a Still Graphic
Additional Features on ISO Models
- Direct Streaming via Ethernet
- Smartphone Tethering
- Stream Buttons
- Record Buttons
- Preparing Media
- Preparing Media on a Computer
- Using the Multiview
- Video Out Buttons
ATEM SDI Extreme ISO
- Connecting Headphones
- Select Bus
- Camera Control Buttons
- Running Macros
- Using SuperSource
ATEM Software Control
- Switching Modes
- Using ATEM Software Control
- Media Manager
- Audio Mixer
- Camera Control
- Using the Software Control Panel
- Transition Control and Upstream Keyer
- Downstream Keyers
- Processing Palettes
- Media Player Tab
- Output Tab
- Recording ISO Files
- Timecode Generator
- Using the Audio Mixer
- Shaping your Audio Mix using Advanced Fairlight Controls
- Using the 6 Band Parametric Equalizer
- Fairlight Controls Workflow Guide
- Using the Media Page
- Navigating the Browse Window
- ATEM Media Pool
- Image File Types
- Creating a TGA File with an Alpha Channel
Camera Control
- Connecting Camera Control
- Camera Control using ATEM Software Control
- Camera Control Panel
- DaVinci Resolve Primary Color Corrector
- Camera Control using ATEM SDI Extreme ISO
- Camera Control using Mini Converter SDI Distribution
Using Macros
- What is a Macro?
- The Macros Window in ATEM Software Control
- Running Macros from ATEM SDI Extreme ISO
Changing Switcher Settings
- General Settings
- Audio Settings
- Multiview Settings
- Labels Settings
- HyperDeck Settings
- Setting the Output Source
- Saving and Restoring Switcher Settings
- Preference Settings
ATEM Setup Settings
- Updating the internal software
- Setup Page
- Documentation Page
Using Adobe Photoshop with ATEM
Using Multiple Control Panels
Connecting to a Network
- Using DHCP and Fixed IP Addresses
- Manually Setting a Fixed IP Address
- Changing ATEM SDI Network Settings
- Changing the Hardware Panel Network Settings
- Setting the Switcher’s IP Location on the Panel
- ATEM Software Control via the Network
Connecting to an Internet Router
- Getting a Stream Key
Keying using ATEM SDI
- Understanding Keying
- Luma Key
- Linear Key
- Pre multiplied Key
- Performing an Upstream Luma/Linear Key
- Chroma Key
- Performing a Chroma Key
- Pattern Key
- DVE Key
- Performing an Upstream DVE Key
- Performing Upstream Keyer Transitions
Streaming Video
- Creating Video Links with ATEM Streaming Bridge
- Direct Connection
- Network Connection
- Remote Administration
- Internet Connection
- Connection Status
- ATEM SDI Pro ISO or ATEM Extreme ISO switcher
- Remote ATEM SDI Switcher
- Broadcast Video Reference
- Factory Reset
- Setting up Open Broadcaster
HyperDeck Control
- Introducing HyperDeck Control
- Controlling HyperDecks with ATEM Software Control
- Controlling HyperDecks with External Hardware Panels
ATEM 1 M/E Advanced Panel
- Connecting the Advanced Panel
Using ATEM 1 M/E Advanced Panel
- Transition Control and Upstream Keyers
- Downstream Keyers
- System Control Menu Buttons
- Performing Transitions
- Recording Macros
ATEM Camera Control Panel
- Changing Network Settings
- Panel Layout
- Controlling Cameras
Mixing Audio
- Using a Third Party Audio Mixer Control Surface
Help
Regulatory Notices
Safety Information
Warranty

Plugging in a Monitor and Testing Inputs

With your video sources connected, you can now plug an SDI monitor into output 1 and check

all the inputs are working. This is also a good opportunity to check sources and see if your

shots are smoothly switching between each other.

Plug an SDI monitor into SDI output 1

TIP ATEM SDI Pro ISO and Extreme ISO models have a powerful multiview feature that

lets you see all your inputs, plus program and preview outputs simultaneously on one

screen. For more information, refer to the ‘using the multiview’ section.

To check your sources, simply press the large numbered buttons on ATEM SDI’s control panel

and watch the SDI monitor. If your sources are working correctly, you should see them switch

between each other.

Use the large numbered buttons to switch between sources

On ATEM SDI Pro ISO and Extreme ISO model switchers, the video out buttons on the right side

of the control panel let you select differentsources for your switcher’s SDI output 1. For more

information on setting outputs refer tothe‘video out buttons’ section later in this manual.

1 2 3 4 5 6 7

RESETAFV

OFFON

RESETAFV

OFFON

RESETAFV

OFFON

RESETAFV

OFFON

RESETAFV

OFFON

RESETAFV

OFFON

RESETAFV

OFFON

RESETAFV

OFFON

FOCUSGAIN

SHUTBLACK

FOCUSGAIN

SHUTBLACK

FOCUSGAIN

SHUTBLACK

FOCUSGAIN

SHUT

K1 LUM

K1 CHR

K1 PTN

K2 LUM

K2 CHR

K2 PTN

DSK 1

DSK 2

MP 1

DVE 1

MP2

DVE 2

COL 1

DIP

COL 2

WIPE

BARS

LOGO

BLACK

STING

BLACK

FOCUSGAIN

SHUTBLACK

FOCUSGAIN

SHUTBLACK

FOCUSGAIN

SHUTBLACK

FOCUSGAIN

SHUTBLACK

OFFON OFFON RESETMUTE

CUT AUTO

1.00.5

2.01.5 DIPMIX PGMM/V

PVWCLEAN

21OFFON 21

OFFOFF OFFSTOP

ONON O N AIRREC

FTB

MIC 1 MIC 2 HEADPHONE SELECT BUS

PICTURE IN PIC TURE

MACRO

DURATION EFFECT VIDEO OUT

KEY 1 DSK 1 RECORD STREAM

DISK

MP 1 S/SRC

MP 2 BLACK

ATEM SDI Extreme ISO

6Getting Started