User Manual

ManualsBrandsBlackmagic Design ManualsMixer and Video ControllerAtem Sdi Extreme Iso - VIDEO PRODUCTION MIXER SWITCHER 8 SDI INPUTS

Table Of Contents

Getting Started
- Plugging in Power
- Plugging in Video Sources
- Plugging in a Monitor and Testing Inputs
- Connect a Microphone
- Connecting to a Computer
- Setting the Webcam Source
Switching your Production
- Switching Sources using a Cut
- Switching Sources using an Auto Transition
- Transition Styles and DVEs
- Controlling Audio
- Using Picture in Picture
- Using the Upstream Keyer
- Fade to Black
- Using a Still Graphic
Additional Features on ISO Models
- Direct Streaming via Ethernet
- Smartphone Tethering
- Stream Buttons
- Record Buttons
- Preparing Media
- Preparing Media on a Computer
- Using the Multiview
- Video Out Buttons
ATEM SDI Extreme ISO
- Connecting Headphones
- Select Bus
- Camera Control Buttons
- Running Macros
- Using SuperSource
ATEM Software Control
- Switching Modes
- Using ATEM Software Control
- Media Manager
- Audio Mixer
- Camera Control
- Using the Software Control Panel
- Transition Control and Upstream Keyer
- Downstream Keyers
- Processing Palettes
- Media Player Tab
- Output Tab
- Recording ISO Files
- Timecode Generator
- Using the Audio Mixer
- Shaping your Audio Mix using Advanced Fairlight Controls
- Using the 6 Band Parametric Equalizer
- Fairlight Controls Workflow Guide
- Using the Media Page
- Navigating the Browse Window
- ATEM Media Pool
- Image File Types
- Creating a TGA File with an Alpha Channel
Camera Control
- Connecting Camera Control
- Camera Control using ATEM Software Control
- Camera Control Panel
- DaVinci Resolve Primary Color Corrector
- Camera Control using ATEM SDI Extreme ISO
- Camera Control using Mini Converter SDI Distribution
Using Macros
- What is a Macro?
- The Macros Window in ATEM Software Control
- Running Macros from ATEM SDI Extreme ISO
Changing Switcher Settings
- General Settings
- Audio Settings
- Multiview Settings
- Labels Settings
- HyperDeck Settings
- Setting the Output Source
- Saving and Restoring Switcher Settings
- Preference Settings
ATEM Setup Settings
- Updating the internal software
- Setup Page
- Documentation Page
Using Adobe Photoshop with ATEM
Using Multiple Control Panels
Connecting to a Network
- Using DHCP and Fixed IP Addresses
- Manually Setting a Fixed IP Address
- Changing ATEM SDI Network Settings
- Changing the Hardware Panel Network Settings
- Setting the Switcher’s IP Location on the Panel
- ATEM Software Control via the Network
Connecting to an Internet Router
- Getting a Stream Key
Keying using ATEM SDI
- Understanding Keying
- Luma Key
- Linear Key
- Pre multiplied Key
- Performing an Upstream Luma/Linear Key
- Chroma Key
- Performing a Chroma Key
- Pattern Key
- DVE Key
- Performing an Upstream DVE Key
- Performing Upstream Keyer Transitions
Streaming Video
- Creating Video Links with ATEM Streaming Bridge
- Direct Connection
- Network Connection
- Remote Administration
- Internet Connection
- Connection Status
- ATEM SDI Pro ISO or ATEM Extreme ISO switcher
- Remote ATEM SDI Switcher
- Broadcast Video Reference
- Factory Reset
- Setting up Open Broadcaster
HyperDeck Control
- Introducing HyperDeck Control
- Controlling HyperDecks with ATEM Software Control
- Controlling HyperDecks with External Hardware Panels
ATEM 1 M/E Advanced Panel
- Connecting the Advanced Panel
Using ATEM 1 M/E Advanced Panel
- Transition Control and Upstream Keyers
- Downstream Keyers
- System Control Menu Buttons
- Performing Transitions
- Recording Macros
ATEM Camera Control Panel
- Changing Network Settings
- Panel Layout
- Controlling Cameras
Mixing Audio
- Using a Third Party Audio Mixer Control Surface
Help
Regulatory Notices
Safety Information
Warranty

Direct Streaming via Ethernet

ATEM SDI Pro ISO and Extreme ISO switchers’ Ethernet connector lets you stream directly while

simultaneously providing the added benefits of ATEM Software Control. You can learn more

about this powerful control software in the ‘using ATEM Software Control’ section.

TIP You can connect your ATEM SDI Pro ISO or Extreme ISO switcher to a Blackmagic

ATEM Streaming Bridge and send broadcast quality video point to point over a local

network or the internet. Refer to the ‘Creating Video Links with ATEM Streaming

Bridge’ section for more information.

Connecting to the Internet

Connect your ATEM switcher to the internet by plugging a network cable from the Ethernet port

to an internet router or a network switch. It’s worth noting that you may need to use a CAT 6

Ethernet cable.

Plug into your internet router via Ethernet to stream directly

Setting up a Live Stream

You can select which platform you want to use in ATEM Software Control and set all the relevant

settings for your stream. If you are setting up a broadcast on your channel that you will regularly

use, these settings will be stored in your switcher and you can then plug into any internet

connection at any time and broadcast directly from the unit.

This section includes how to configure settings for YouTube Studio and Twitch.

TIP As you’re setting up your broadcast, it’s worth loading a standby graphic into

ATEM Software Control’s media player and switching it to the program output so you

can perform a quick test broadcast before actually going live.

To configure your settings for YouTube Studio:

1 Log into your YouTube account. Click ‘go live’ from the ‘create’ menu.

2 If prompted, choose to start your stream ‘right now’ or at a ‘later date’ and select

‘streaming software’ from the options.

3 Set the child protection to the appropriate setting and press save.

4 Select ‘edit’ and Enter your broadcast name and details. Set the broadcast to ‘public’ so

anyone can watch.

5 An auto generated stream key will appear in the stream settings, click ‘copy’ to copy

the stream key.

16Additional Features on ISO Models