User Manual

ManualsBrandsBlackmagic Design ManualsMixer and Video ControllerAtem Sdi Extreme Iso - VIDEO PRODUCTION MIXER SWITCHER 8 SDI INPUTS

141

142

143

144

145

146

147

148

149

150

Table Of Contents

Getting Started
- Plugging in Power
- Plugging in Video Sources
- Plugging in a Monitor and Testing Inputs
- Connect a Microphone
- Connecting to a Computer
- Setting the Webcam Source
Switching your Production
- Switching Sources using a Cut
- Switching Sources using an Auto Transition
- Transition Styles and DVEs
- Controlling Audio
- Using Picture in Picture
- Using the Upstream Keyer
- Fade to Black
- Using a Still Graphic
Additional Features on ISO Models
- Direct Streaming via Ethernet
- Smartphone Tethering
- Stream Buttons
- Record Buttons
- Preparing Media
- Preparing Media on a Computer
- Using the Multiview
- Video Out Buttons
ATEM SDI Extreme ISO
- Connecting Headphones
- Select Bus
- Camera Control Buttons
- Running Macros
- Using SuperSource
ATEM Software Control
- Switching Modes
- Using ATEM Software Control
- Media Manager
- Audio Mixer
- Camera Control
- Using the Software Control Panel
- Transition Control and Upstream Keyer
- Downstream Keyers
- Processing Palettes
- Media Player Tab
- Output Tab
- Recording ISO Files
- Timecode Generator
- Using the Audio Mixer
- Shaping your Audio Mix using Advanced Fairlight Controls
- Using the 6 Band Parametric Equalizer
- Fairlight Controls Workflow Guide
- Using the Media Page
- Navigating the Browse Window
- ATEM Media Pool
- Image File Types
- Creating a TGA File with an Alpha Channel
Camera Control
- Connecting Camera Control
- Camera Control using ATEM Software Control
- Camera Control Panel
- DaVinci Resolve Primary Color Corrector
- Camera Control using ATEM SDI Extreme ISO
- Camera Control using Mini Converter SDI Distribution
Using Macros
- What is a Macro?
- The Macros Window in ATEM Software Control
- Running Macros from ATEM SDI Extreme ISO
Changing Switcher Settings
- General Settings
- Audio Settings
- Multiview Settings
- Labels Settings
- HyperDeck Settings
- Setting the Output Source
- Saving and Restoring Switcher Settings
- Preference Settings
ATEM Setup Settings
- Updating the internal software
- Setup Page
- Documentation Page
Using Adobe Photoshop with ATEM
Using Multiple Control Panels
Connecting to a Network
- Using DHCP and Fixed IP Addresses
- Manually Setting a Fixed IP Address
- Changing ATEM SDI Network Settings
- Changing the Hardware Panel Network Settings
- Setting the Switcher’s IP Location on the Panel
- ATEM Software Control via the Network
Connecting to an Internet Router
- Getting a Stream Key
Keying using ATEM SDI
- Understanding Keying
- Luma Key
- Linear Key
- Pre multiplied Key
- Performing an Upstream Luma/Linear Key
- Chroma Key
- Performing a Chroma Key
- Pattern Key
- DVE Key
- Performing an Upstream DVE Key
- Performing Upstream Keyer Transitions
Streaming Video
- Creating Video Links with ATEM Streaming Bridge
- Direct Connection
- Network Connection
- Remote Administration
- Internet Connection
- Connection Status
- ATEM SDI Pro ISO or ATEM Extreme ISO switcher
- Remote ATEM SDI Switcher
- Broadcast Video Reference
- Factory Reset
- Setting up Open Broadcaster
HyperDeck Control
- Introducing HyperDeck Control
- Controlling HyperDecks with ATEM Software Control
- Controlling HyperDecks with External Hardware Panels
ATEM 1 M/E Advanced Panel
- Connecting the Advanced Panel
Using ATEM 1 M/E Advanced Panel
- Transition Control and Upstream Keyers
- Downstream Keyers
- System Control Menu Buttons
- Performing Transitions
- Recording Macros
ATEM Camera Control Panel
- Changing Network Settings
- Panel Layout
- Controlling Cameras
Mixing Audio
- Using a Third Party Audio Mixer Control Surface
Help
Regulatory Notices
Safety Information
Warranty

Transition Control and Upstream Keyers

ON AIR

The ON AIR indicator buttons above each keyer are labeled ON and indicate which of the

upstream keys are currently on air. These can also be used to immediately cut a key on

or off air.

MACRO

The macro button is used to enable the macro feature which changes the source select row

ofbuttons to macro buttons corresponding to macro slots.

TIP There are ten macro buttons in the source select row, so if you have macros

recorded to slots greater than ten, you can access these by opening the macro

settings in the LCD menu and changing the macro group using the control knob.

For more information on how to record and run macros using the advanced panel, refer to

‘recording Macros using ATEM 1 M/E Advanced Panel’ later in this section.

Downstream Keyers

DSK TIE

The DSK TIE button will enable the DSK on the preview output, along with the next transition

effects, and tie it to the main transition control so that the DSK can be taken to air with the

next transition.

Because the tied downstream keyer is now tied to the main transition, the transition will happen

at the rate specified in the auto rate setting in the LCD ‘home’ menu. When the DSK is tied,

thesignal routing to the clean feed 1 is unaffected.

DSK CUT

The DSK CUT button is used to cut the DSK on or off air and indicates whether the DSK is

currently on or off air. The button is illuminated if the DSK is currently on air.

DSK AUTO

The DSK AUTO button will mix the DSK on or off air at the rate specified in the DSK rate

LCDmenu setting.

147Using ATEM 1 M/E Advanced Panel