User Manual
Table Of Contents
- Getting Started
- Switching your Production
- Additional Features on ISO Models
- ATEM SDI Extreme ISO
- ATEM Software Control
- Switching Modes
- Using ATEM Software Control
- Media Manager
- Audio Mixer
- Camera Control
- Using the Software Control Panel
- Transition Control and Upstream Keyer
- Downstream Keyers
- Processing Palettes
- Media Player Tab
- Output Tab
- Recording ISO Files
- Timecode Generator
- Using the Audio Mixer
- Shaping your Audio Mix using Advanced Fairlight Controls
- Using the 6 Band Parametric Equalizer
- Fairlight Controls Workflow Guide
- Using the Media Page
- Navigating the Browse Window
- ATEM Media Pool
- Image File Types
- Creating a TGA File with an Alpha Channel
- Camera Control
- Using Macros
- Changing Switcher Settings
- ATEM Setup Settings
- Using Adobe Photoshop with ATEM
- Using Multiple Control Panels
- Connecting to a Network
- Connecting to an Internet Router
- Keying using ATEM SDI
- Streaming Video
- HyperDeck Control
- ATEM 1 M/E Advanced Panel
- Using ATEM 1 M/E Advanced Panel
- ATEM Camera Control Panel
- Mixing Audio
- Help
- Regulatory Notices
- Safety Information
- Warranty
Streaming Video
Creating Video Links with ATEM Streaming Bridge
The ATEM Streaming Bridge allows you to decode the streaming video from any ATEM SDI Pro
ISO or Extreme ISO model switcher and convert it back to SDI or HDMI video. It allows you to
send video over your local network, or to anywhere in the world via the internet.
You can connect ATEM Streaming Bridge in 3 different ways. One is to connect it direct to your
switcher using a simple Ethernet cable, or you can connect it via your local network, or you can
use it anywhere in the world using the Internet.
Direct Connection
The simplest way to get ATEM Streaming Bridge operating is to plug it into an ATEM SDI Pro ISO
or Extreme ISO switcher with a simple Ethernet cable. The switcher will see it and automatically
send video to it when you press the on air button.
Setting up a direct connection
1 Plug power into ATEM Streaming Bridge
2 Connect an Ethernet cable to the ATEM Streaming Bridge.
3 Connect a television to the HDMI on ATEM Streaming Bridge.
4 Connect the other end of the Ethernet cable to the switcher.
5 Press the On Air button on the switcher.
Now you should see video appear on the HDMI television connected to
ATEM Streaming Bridge.
123Streaming Video