User Manual

ManualsBrandsBlackmagic Design ManualsMixer and Video ControllerAtem Sdi Pro Iso - VIDEO PRODUCTION MIXER SWITCHER 4 SDI INPUTS

Table Of Contents

Getting Started
- Plugging in Power
- Plugging in Video Sources
- Plugging in a Monitor and Testing Inputs
- Connect a Microphone
- Connecting to a Computer
- Setting the Webcam Source
Switching your Production
- Switching Sources using a Cut
- Switching Sources using an Auto Transition
- Transition Styles and DVEs
- Controlling Audio
- Using Picture in Picture
- Using the Upstream Keyer
- Fade to Black
- Using a Still Graphic
Additional Features on ISO Models
- Direct Streaming via Ethernet
- Smartphone Tethering
- Stream Buttons
- Record Buttons
- Preparing Media
- Preparing Media on a Computer
- Using the Multiview
- Video Out Buttons
ATEM SDI Extreme ISO
- Connecting Headphones
- Select Bus
- Camera Control Buttons
- Running Macros
- Using SuperSource
ATEM Software Control
- Switching Modes
- Using ATEM Software Control
- Media Manager
- Audio Mixer
- Camera Control
- Using the Software Control Panel
- Transition Control and Upstream Keyer
- Downstream Keyers
- Processing Palettes
- Media Player Tab
- Output Tab
- Recording ISO Files
- Timecode Generator
- Using the Audio Mixer
- Shaping your Audio Mix using Advanced Fairlight Controls
- Using the 6 Band Parametric Equalizer
- Fairlight Controls Workflow Guide
- Using the Media Page
- Navigating the Browse Window
- ATEM Media Pool
- Image File Types
- Creating a TGA File with an Alpha Channel
Camera Control
- Connecting Camera Control
- Camera Control using ATEM Software Control
- Camera Control Panel
- DaVinci Resolve Primary Color Corrector
- Camera Control using ATEM SDI Extreme ISO
- Camera Control using Mini Converter SDI Distribution
Using Macros
- What is a Macro?
- The Macros Window in ATEM Software Control
- Running Macros from ATEM SDI Extreme ISO
Changing Switcher Settings
- General Settings
- Audio Settings
- Multiview Settings
- Labels Settings
- HyperDeck Settings
- Setting the Output Source
- Saving and Restoring Switcher Settings
- Preference Settings
ATEM Setup Settings
- Updating the internal software
- Setup Page
- Documentation Page
Using Adobe Photoshop with ATEM
Using Multiple Control Panels
Connecting to a Network
- Using DHCP and Fixed IP Addresses
- Manually Setting a Fixed IP Address
- Changing ATEM SDI Network Settings
- Changing the Hardware Panel Network Settings
- Setting the Switcher’s IP Location on the Panel
- ATEM Software Control via the Network
Connecting to an Internet Router
- Getting a Stream Key
Keying using ATEM SDI
- Understanding Keying
- Luma Key
- Linear Key
- Pre multiplied Key
- Performing an Upstream Luma/Linear Key
- Chroma Key
- Performing a Chroma Key
- Pattern Key
- DVE Key
- Performing an Upstream DVE Key
- Performing Upstream Keyer Transitions
Streaming Video
- Creating Video Links with ATEM Streaming Bridge
- Direct Connection
- Network Connection
- Remote Administration
- Internet Connection
- Connection Status
- ATEM SDI Pro ISO or ATEM Extreme ISO switcher
- Remote ATEM SDI Switcher
- Broadcast Video Reference
- Factory Reset
- Setting up Open Broadcaster
HyperDeck Control
- Introducing HyperDeck Control
- Controlling HyperDecks with ATEM Software Control
- Controlling HyperDecks with External Hardware Panels
ATEM 1 M/E Advanced Panel
- Connecting the Advanced Panel
Using ATEM 1 M/E Advanced Panel
- Transition Control and Upstream Keyers
- Downstream Keyers
- System Control Menu Buttons
- Performing Transitions
- Recording Macros
ATEM Camera Control Panel
- Changing Network Settings
- Panel Layout
- Controlling Cameras
Mixing Audio
- Using a Third Party Audio Mixer Control Surface
Help
Regulatory Notices
Safety Information
Warranty

Camera Control using ATEM SDI Extreme ISO

ATEM SDI Extreme ISO allows you to control Blackmagic camera settings including iris, gain,

focus and shutter directly from the switcher’s control panel.

The camera control buttons are located above the audio options for each input. You can

adjust the camera settings in much the same way as the camera control panel in ATEM

Software Control.

Camera control buttons will illuminate green when selected

Iris

By default, the arrow buttons control iris when no other option is selected.

Toset auto exposure on, press both of the arrow buttons simultaneously.

This setting automatically adjusts the aperture to maintain a constant exposure while keeping

shutter angle consistent. This will keep motion blur unaffected, but mayaffect your depth

of field.

To manually adjust the iris:

1 Press the up arrow to increase the aperture.

2 Press the down arrow to decrease.

TIP The arrow buttons control iris unless another setting, for example gain or shutter,

is selected. The selected setting will time out 3 seconds from the last button press.

Gain

The camera gain setting allows you to turn on additional gain in the camera. This is

important when you are operating in low light conditions and need extra gain in the

front end of the camera to avoid your images being under exposed.

To adjust the gain:

1 Press the gain button to highlight the setting.

2 Press the up arrow to increase the gain or the down arrow to decrease.

It’s worth noting that adding gain will increase noise in your images.

1 2 3 4

5 6 7

RESETAFV

OFFON

RESETAFV

OFFON

RESETAFV

OFFON

RESETAFV

OFFON

RESET

AFV

OFF

RESETAFV

OFFON

RESETAFV

OFFON

RESETAFV

OFFON

FOCUSGAIN

SHUTBLACK

FOCUSGAIN

SHUTBLACK

FOCUSGAIN

SHUTBLACK

FOCUSGAIN

SHUT

K1 LUM

K1 CHR

K1 PTN

K2 LUM

K2 CHR

K2 PTN

DSK 1

DSK 2

MP 1

DVE 1

MP2

DVE 2

COL 1

DIP

COL 2

WIPE

BARS

LOGO

BLACK

STING

BLACK

FOCUS

GAIN

SHUT

BLACK

FOCUSGAIN

SHUTBLACK

FOCUSGAIN

SHUTBLACK

FOCUSGAIN

SHUTBLACK

OFFON OFFON RESETMUTE

CUT AUTO

1.00.5

2.01.5 DIPMIX PGMM/V

PVWCLEAN

21OFFON 21

OFFOFF OFFSTOP

ONON ON AIRREC

FTB

MIC 1 MIC 2 HEADPHONE

SELEC T BUS

PICTUR E IN PICTURE

MACRO

DURATION EFFECT VIDEO OUT

KEY 1 DSK 1 RECORD STREAM

DISK

MP 1 S/SRC

MP 2 BLACK

ATEM SDI Extreme ISO

75Camera Control