User Manual

Press the ‘auto’ or ‘cut’ button to switch the source to air.
Using ATEM Software Control
ATEM Software Control has four main control windows: Switcher, Media, Audio and Camera.
You can open these windows by clicking the three main buttons at the bottom of the interface
or by pressing the Shift and left/right arrow hot keys. A general settings window can be opened
by selecting the gear icon at the lower left of the interface.
You can connect your computer to your ATEM SDI via USB or over a network. For more information
on connecting your ATEM SDI to a network, refer to the ‘connecting to a network’ section.
Switcher Panel
When first launched, the switcher screen is selected, this is the main control interface for your
ATEM SDI switcher.
Mouse or Trackpad Operation
The virtual buttons, sliders and fader bar on the software control panel are operated using your
computer mouse or a trackpad if you’re using a laptop.
To activate a button, click once with the left mouse button. To activate a slider, click and hold
down the left mouse button while dragging. Similarly, to control the fader bar, click and hold
down the left mouse button on the fader bar handle and drag up or down.
34ATEM Software Control