User Manual

ManualsBrandsBlackmagic Design ManualsMixer and Video ControllerAtem Sdi Pro Iso - VIDEO PRODUCTION MIXER SWITCHER 4 SDI INPUTS

Table Of Contents

Getting Started
- Plugging in Power
- Plugging in Video Sources
- Plugging in a Monitor and Testing Inputs
- Connect a Microphone
- Connecting to a Computer
- Setting the Webcam Source
Switching your Production
- Switching Sources using a Cut
- Switching Sources using an Auto Transition
- Transition Styles and DVEs
- Controlling Audio
- Using Picture in Picture
- Using the Upstream Keyer
- Fade to Black
- Using a Still Graphic
Additional Features on ISO Models
- Direct Streaming via Ethernet
- Smartphone Tethering
- Stream Buttons
- Record Buttons
- Preparing Media
- Preparing Media on a Computer
- Using the Multiview
- Video Out Buttons
ATEM SDI Extreme ISO
- Connecting Headphones
- Select Bus
- Camera Control Buttons
- Running Macros
- Using SuperSource
ATEM Software Control
- Switching Modes
- Using ATEM Software Control
- Media Manager
- Audio Mixer
- Camera Control
- Using the Software Control Panel
- Transition Control and Upstream Keyer
- Downstream Keyers
- Processing Palettes
- Media Player Tab
- Output Tab
- Recording ISO Files
- Timecode Generator
- Using the Audio Mixer
- Shaping your Audio Mix using Advanced Fairlight Controls
- Using the 6 Band Parametric Equalizer
- Fairlight Controls Workflow Guide
- Using the Media Page
- Navigating the Browse Window
- ATEM Media Pool
- Image File Types
- Creating a TGA File with an Alpha Channel
Camera Control
- Connecting Camera Control
- Camera Control using ATEM Software Control
- Camera Control Panel
- DaVinci Resolve Primary Color Corrector
- Camera Control using ATEM SDI Extreme ISO
- Camera Control using Mini Converter SDI Distribution
Using Macros
- What is a Macro?
- The Macros Window in ATEM Software Control
- Running Macros from ATEM SDI Extreme ISO
Changing Switcher Settings
- General Settings
- Audio Settings
- Multiview Settings
- Labels Settings
- HyperDeck Settings
- Setting the Output Source
- Saving and Restoring Switcher Settings
- Preference Settings
ATEM Setup Settings
- Updating the internal software
- Setup Page
- Documentation Page
Using Adobe Photoshop with ATEM
Using Multiple Control Panels
Connecting to a Network
- Using DHCP and Fixed IP Addresses
- Manually Setting a Fixed IP Address
- Changing ATEM SDI Network Settings
- Changing the Hardware Panel Network Settings
- Setting the Switcher’s IP Location on the Panel
- ATEM Software Control via the Network
Connecting to an Internet Router
- Getting a Stream Key
Keying using ATEM SDI
- Understanding Keying
- Luma Key
- Linear Key
- Pre multiplied Key
- Performing an Upstream Luma/Linear Key
- Chroma Key
- Performing a Chroma Key
- Pattern Key
- DVE Key
- Performing an Upstream DVE Key
- Performing Upstream Keyer Transitions
Streaming Video
- Creating Video Links with ATEM Streaming Bridge
- Direct Connection
- Network Connection
- Remote Administration
- Internet Connection
- Connection Status
- ATEM SDI Pro ISO or ATEM Extreme ISO switcher
- Remote ATEM SDI Switcher
- Broadcast Video Reference
- Factory Reset
- Setting up Open Broadcaster
HyperDeck Control
- Introducing HyperDeck Control
- Controlling HyperDecks with ATEM Software Control
- Controlling HyperDecks with External Hardware Panels
ATEM 1 M/E Advanced Panel
- Connecting the Advanced Panel
Using ATEM 1 M/E Advanced Panel
- Transition Control and Upstream Keyers
- Downstream Keyers
- System Control Menu Buttons
- Performing Transitions
- Recording Macros
ATEM Camera Control Panel
- Changing Network Settings
- Panel Layout
- Controlling Cameras
Mixing Audio
- Using a Third Party Audio Mixer Control Surface
Help
Regulatory Notices
Safety Information
Warranty

2 Now press a duration you want for the mix.

3 Press the ‘auto’ button to tell your ATEM SDI want to use an automated transition.

4 Press the input 2 button to perform the mix transition.

You will now see inputs 1 and 2 buttons illuminated red while the transition happens and your

broadcast changes to input 2. When the transition is complete, input 2 will be illuminated red to

indicate it is now live on air.

Transition Styles and DVEs

The buttons above the ‘auto’ button contain different transition styles, including a mix cross

dissolve and a dip to color.

You can also select horizontal and vertical wipe transitions by pressing their respective

transition style buttons. These also include DVE push and squeeze transitions.

Press the transition type button for the transition you want to use, for example a horizontal

or vertical wipe, push or squeeze DVE transition, and mix or dip transition

ATEM SDI Extreme ISO models provide more transition types. Below is a table of the different

transition types you can select on the control panel.

DVE Push Horizontal DVE Squeeze Horizontal

DVE Push Vertical DVE Squeeze Vertical

Circle Wipe Box Wipe

Diagonal Wipe Diagonal Wipe

Vertical Wipe Horizontal Wipe

Mix Dip

10Switching your Production