User Manual

Using Mark Clip with all Auto Select controls enabled, the clip on the
lowest-numbered video track with Auto Select enabled defines the result
However, if you disable the Auto Select control of track V1, then whichever clip is on the lowest
video track with Auto Select still enabled is used as the target clip for the Mark Clip operation.
In this example, the shorter clip on track V2 now sets the locations of the In and Out points.
Using Mark Clip with Auto Select controls enabled
Methods of enabling and disabling the Auto Select controls:
 To toggle Auto Select for any track: Click any track’s Auto Select control.
 To toggle Auto Select for video tracks: Press Option-F1 through F8 to toggle Auto
Select on the corresponding tracks.
 To toggle Auto Select for audio tracks: Press Option-Command-F1 through F8 to
toggle Auto Select on the corresponding tracks.
 To toggle all video track Auto Select tracks off and on: Press Option-F9.
 To toggle all audio track Auto Select tracks off and on: Press Option-Command-F9.
 To “solo” Auto Select for a track and disable Auto Select on all other tracks:
Option-click any Auto Select control to leave that control on while turning off all other
Auto Select controls of that type (video or audio).
 To turn all audio or video Auto Select controls on and off: Shift-click any video or
audio Auto Select control to toggle on or off all Auto Select controls of that type (video
or audio).
Chapter – 28 Editing Basics 586