User Manual

Table Of Contents
clips at once by right clicking on your selection and choosing ‘extract audio…’ from the drop
down menu. During audio extraction, an information box indicates the progress. You can click
the ‘stop’ button any time to stop the extraction.
You can filter the contents in the media storage to make it easier to manage them.
NOTE: If the ‘timestamp prefix’ checkbox was deselected in the ‘capture info’ section
when your clips were scanned, and you want to have extracted audio automatically
embedded in your clips, always remember to extract audio from the clips inside the
media pool.
Audio Extraction Settings
Normally, once you have selected the film type, the automatic features in DaVinci Resolve will
extract your optical audio perfectly. However, the condition of the optical track can vary with
the condition of the film being loaded and in some instances this can confuse the automation.
Ifthis happens, you can bypass the automatic features and make adjustments manually.
For manual adjustments, simply open the ‘Audio Extraction’ settings window by clicking on
‘Show Cintel Audio Settings’ in the inspector options near the top right of the viewer.
Chapter – 17 Capturing from the Cintel FilmScanner 391