User Manual

9 If there’s a gap between any two scene cuts that you’re positive should have another
scene cut, then scrub the playhead or use the transport controls to find the missing cut,
and click the “Add” button at the bottom left corner of the Scene Detect window to add
another scene cut.
TIP: Adjacent shots with very similar ranges of color and contrast may
sometimes go undetected by the scene detection algorithm. If you know
of scenes in the media you’re analyzing that are like this, you may want to
scrub through them a bit more carefully to make sure you’re not missing
anything. However, if you find you’ve missed a cut later, you can always use
the SplitClip control in the Edit page timeline to add a new edit point.
10 When you’re confident that the Cut List is accurate, split the media file into individual
clips in the Media Pool by clicking “Add Cuts to Media Pool.”
11 When the Conform Settings dialog appears, click OK if you checked your settings
instep 2.
12 Close the Scene Detect window.
The individually cut up clips of the media file you analyzed now appear in the
MediaPool, and you can edit the entire sequence of clips into a new Timeline in order,
ready for grading.
Chapter – 15 Using SceneDetection 364