User Manual

Fader Bank 1 in Manual mapping mode showing custom mapping: A21, blank, A30, A40,
and DIALOG mapped to the first five faders; red Call buttons indicate bank mapping is
engaged, with the first fader’s Call button active
Manual Fader Bank mapping action keys in the bottom row of the picture keyboard
Spilling bus member tracks to nearby faders:
1 In the Fader Bank Display buttons, select a fader bank that contains at least one bus.
Buses include main, submix, Aux buses, and VCA groups.
2 Momentarily press and hold the Bank/Flip key to change the yellow Call buttons to
green Call buttons on the bus fader channels.
3 Press the green Call button for the bus fader you wish to spill to the neighboring faders.
Once spilled, the Bank/Flip button turns purple to indicate that the current fader bank is
displaying spilled faders for the active bus.
4 To modify the fader spill direction or type of fader that is temporarily remapped, use the
Fader Spill options keys available in the Setup mode picture key toolset.
Fader Spill option keys include:
 Fader Spill: Use this menu key to reveal two menu Spill option keys that determine the
type of fader channel and direction in which member tracks are temporarily mapped to
the adjoining faders on the Fairlight Channel Fader panel.
 Spill Left/Spill Right: This menu options key toggles between Spill: Left and Spill: Right,
which in turn dictates whether the member tracks of a bus are assigned to neighboring
faders to the left or right of a bus when Spill is engaged in the Channel Fader panel.
Chapter – 163 Fairlight Consoles 3404