User Manual

Table Of Contents
Manually mapping faders to banks:
1 In the Fader Bank Display buttons, press CTRL and the 3/Map key to enter fader
mapping mode. You’ll know that you entered bank mapping mode because all of
the Call buttons turn red. The bank mapping is set to Auto mode by default, which
automatically maps channels to faders in sequential order in groups of 12 up to 144.
When you enter channel mapping mode, the top four rows of picture keys in the Audio
Editor change to track selection keys, while the bottom row of picture keys shows the
following dedicated channel mapping function keys:
Exit: Exits the channel mapping mode.
Delete: Deletes the channel assigned to the active channel indicated by the tallied
red Call button.
Blank: Leaves a blank fader bank beneath the active red Call button. This is useful
for adding a space between groups of similar tracks such as dialogue, background
sound effects, and music.
Insert: As the name suggests, this key inserts an unassigned fader in the position of
the active red Call button.
2 In the bottom row of the picture keyboard, press the first key
(MODE: Auto/MODE:Manual) to toggle the fader mapping to Manual mode.
3 Press the red Call button on the fader you would like to assign, then choose a channel
from the track selection buttons on the adjacent picture keys in the Audio Editor.
Onceyou assign a track or bus to a fader, the next fader to the right becomes active
with a red tallied Call button so that you can continue assigning faders sequentially.
This automatic call selection also applies to the Delete, Blank, and Insert manual
mapping functions.
4 Select up to 12 track selection keys to assign to the current fader bank. Use the Bank
display buttons to manually assign additional banks as needed.
5 When you are finished mapping tracks to faders, press the Exit button in the bottom
row of picture keys. Once you exit manual mapping mode, the picture keyboard layout
returns to the current mode.
Example of Fader Bank 1 in Auto Mapping Mode
Fader Bank 1 in Auto mapping mode showing sequential tracks 1-12 with red Call buttons to indicate
bank mapping mode is engaged and the first fader channel’s Call button is active
Chapter – 163 Fairlight Consoles 3402