User Manual

 Channel: Use Channel mode to control up to 192 parameters on one channel.
In channel mode, the12 groups of controls on the channel control module are used
collectively to adjust parameters for a specific channel from left to right as displayed
on the LCD Monitor. In Channel mode, there are several ways to choose which
channel is displayed, including the Channel Call buttons on the Channel Fader panel,
the Channel Select buttons on Channel Control panel, the Call Follows menu, the edit
controller, or by selecting a track in the Fairlight page Timeline or Mixer. This is the most
common channel control mode in audio post production, as it provides quick access to
all parameter controls for a specific track.
Channel Control components in Channel mode
 Master: This mode utilizes all channel controls to adjust parameters for the buses and
main output. In Master mode, the 12 groups of controls on the channel control panel
adjust the adjacent main output parameters displayed on the LCD. The channel controls
in Master mode are organized from left to right in order of processing. Master mode is
commonly used while mixing and mastering soundtracks.
Channel Control components in Master mode
Chapter – 163 Fairlight Consoles 3388