User Manual

Macro Mode action keys:
 Delete: Press and hold this key and press a Macro key to delete the macro.
 Rename: Press and hold this key and press a Macro key to open the User Macros
dialog and rename the macro.
 Record: Press and hold this key and press a numbered Macro key to record. Press
Control and the Menu key to stop recording. The Menu modifier key changes to Menu
(rec) when recording a macro and Stop Recording when you press the Control modifier
key while recording a macro.
Standard modifier keys in Macros mode and Macros action keys,
including Delete, Rename, and Record
Menu becomes Menu Record key during macro recording and
Stop Record when Control key is pressed during macro recording
Recording a Macro:
1 Set up the Editor for whatever steps you plan to record in the Macro and
latch that mode.
2 Momentarily press the Macros mode key to enter that mode temporarily.
3 Do not release the Macros key.
4 With the other hand, in the Macro mode toolset, momentarily press the Record key and
the numbered Macro key that you want to record. Release the Record and numbered
Macro key.
5 Release the Macros mode key to return to the latched Editor mode.
6 Press the keys one at a time as needed to complete the steps that you want to record
to the macro.
7 Stop playback, if necessary.
8 Press the Control key and press the Stop Recording key in the modifiers
section of the keyboard.
NOTE: You can take as long as you need to record a macro, and if you make a mistake
you can either delete the macro or re-record it using the Delete or Record keys.
Chapter – 162 Using the Fairlight Audio Editor 3367