User Manual

Table Of Contents
Record Mode Manual Recording special toolset keys include:
Record Here: Playhead goes back the pre-roll duration, then punches into Record at
the location where you issued the command. This can be useful when you zoom in to
find the exact timecode position where you want to punch in to record, then simply
issue this command by pressing the Record Here key and the system does everything
for you.
Record Range: The playhead includes a pre-roll and punches into Record at the Range
In point, and then punches out at the Range Out point.
Record Clip: After pre-roll, the playhead punches in and out to match the duration of
the clip under the playhead on the selected track. If no clip is beneath the playhead,
the transport moves forward to the next clip in the track and records there.
Record Again: Pressing this key repeats the last recording you made, both entry and
exit, whether it was manually or automatically punched in.
Punch In Again: The system pre-rolls, then enters record at the exact same place as
last time, whether it was manually for automatically activated. When entering this record
operation, you still need to manually punch out. This allows you to get the same start
point for recording but with a manual exit.
Record Head: Pre-rolls, then starts recording at the head of the first clip to come
beneath the playhead in the selected track. When entering this record operation, you
still need to manually punch out.
Monitor Mode Toolset
As the name suggests, this mode is for setting up your monitor system. In most cases, this is set
up at installation, but there are also controls for setting up the monitors for a particular session
and quickly switching between different sources, including external sources, speaker sets, and
surround formats. You can even mute any of the current speakers by latching its associated
picture key marked with a Speaker icon.
Monitor mode default keys showing Control Room monitoring
Monitor mode keys for enhanced features only available in the Fairlight Audio Editor:
C/R / Studio toggle: This key toggles the Monitor mode keys between
Control Room (C/R) and Studio monitoring keys.
Phase: Hold this key and press any speaker button to toggle its phase.
Chapter – 162 Using the Fairlight Audio Editor 3365