User Manual

The Review, Shuttle mode, Rewind, and Fast Forward keys can all be customized and used in a
variety of ways.
To change the Review jump back amount, do the following:
1 Momentary-press the Review key to illuminate the current Review setting in the
numeric keypad.
2 Long-press a different number of seconds from 1 to 9 on the numeric keypad until it
tallys on to set a new review duration.
3 Release the number and the Review key.
a Free Shuttle mode: When engaged, the shuttle wheel turns freely clockwise
or counter-clockwise, can change direction instantaneously, and shuttles at variable
speeds based on the amount and direction you turn the wheel.
b Fixed Shuttle mode: Turning the wheel forward or back starts fast-forward
or reverse playback at a fixed speed with built-in stops whenever you
change direction.
To toggle Shuttle mode between Free Shuttle and Fixed Shuttle, do the following:
1 Latch or Momentary-press the Setup mode key.
2 Latch the Editor Mode key in the Setup toolset to show the Editor Mode menu
option keys.
3 In the Editor Mode menu option keys, latch or unlatch the Shuttle option key to toggle
between Shuttle Fixed and Shuttle Free settings.
To toggle the Rewind and Fast Forward keys to Jump keys or vice versa, do the following:
1 Latch or Momentary-press the Setup mode key.
2 Latch the Editor Mode key in the Setup toolset to show the Editor Mode menu
option keys.
3 In the Editor Mode menu option keys, latch the Mode Wind key to toggle on
Mode Jump. The Fixed Rewind and Fast Forward keys above the jog wheel are
now set as Jump keys.
4 If the Fixed Rewind and Fast Forward keys are in Jump mode, you can toggle them
to Wind mode by following steps 1 and 2, then unlatch the Mode Jump key to toggle
it back to Mode Wind.
To set a user-defined Zoom view in the Timeline.
1 Momentary-press the Zoom and CTRL keys.
2 In the soft menu picture keys, long-press one of the user keys (U1, U2, U3, or U4) until
the main picture keyboard shows all tracks.
3 In the picture keyboard, latch the track selection keys for all of the tracks you would like
to include in the user-defined view.
4 At the bottom of the picture keyboard, momentary-press the Menu key and the Fairlight
key to exit the user Zoom setup mode.
5 You can repeat steps 1-3 for each of the four user-defined Zoom view keys.
Chapter – 162 Using the Fairlight Audio Editor 3356