Manualshelf

User Manual

ManualsBrandsBlackmagic Design ManualsMixer and Video ControllerDaVinci Resolve Mini Panel + DaVinci Resolve Studio Tribute - CONTROLLER FOR RESOLVE DAVINCI
3351335233533354335533563357335833593360
Table Of Contents
A long-press on the Loop key displays the Loop Playback Options menu keys:
Loop Range: Loops playback around the marked range, from In Point to Out Point in the
Timeline.
Loop Clip: This operation loops playback around the clip beneath the playhead on the
most-recently-selected track. If there is not a clip beneath the playhead on the active
track, the next clip in the track is played. If a track is not selected, this key has no affect
on playback.
Loop +/- 1: This creates a two second playback loop around the current playhead
position that starts one second before the playhead and ends one second after the
playhead.
Loop +/- 3: This creates a six second loop around the current playhead position that
starts three seconds before the playhead and ends three seconds after.
Exit: Exits the Loop Options menu without changing the current loop playback mode.
(Left) Default soft menu keys with Play Menu key unlatched with Loop key set to Loop Clip, (Center) Play Menu
key latched, showing Playback Options keys, (Right) Loop key latched, showing Loop Options menu for
assigning Loop Playback mode
Fixed Keys in Clockwise Order Starting in the Upper-left Above the Jog Wheel:
Shuttle/Position: Latch this key to engage the wheel as a shuttle control for navigation
and playback. Unlatch or press Stop to stop playback and disengage the shuttle wheel.
While Shuttle is active, the Rewind and Fast Forward transport keys light up to indicate
which direction the transport is moving. In the Setup mode, Editor Setup keys you can
change the shuttle to either Free or Fixed mode.
–
Free Shuttle mode: When engaged, the shuttle wheel turns freely clockwise or
counter-clockwise, can change direction instantaneously, and shuttles at variable
speeds based on the amount and direction you turn the wheel.
–
Fixed Shuttle mode: Turning the wheel forward or back starts fast-forward or
reverse playback at a fixed speed with built-in stops whenever you change direction.
–
Position mode: Hold the Shuttle/Position key while turning the wheel to quickly
position the playhead (CTI) in the Timeline. In position mode, you can move
the playhead from the beginning to the end of the Timeline in a single rotation
of the wheel.
Chapter – 162 Using the Fairlight Audio Editor 3351