User Manual

Control Room monitoring controls include:
 Control Room knob: this can be used to quickly dial the level of the speakers selected
in the control room. You can select alternate control room speaker sets in the Monitor
mode toolset.
 DIM: This button reduces the Control Room monitor volume by a user-defined
amount. Press to toggle Dim on or off. You can set the Dim level on the Editor screen in
Monitor mode.
 MUTE: Use this button to mute or unmute the Control Room monitors.
The Studio controls control the Studio monitoring circuit of a Fairlight Accelerator card installed
on your workstation.
Studio monitoring controls include:
 Studio knob: Use this to dial the level of the speakers in the Studio.
 Talk: Latch this button to toggle on or off a talkback microphone. When latched, the
talkback mic remains live. Momentary-press the talk button to use talkback without
latching, in this case, the talkback mic will remain live only during the momentary-press
and shut off when you release. Press Control with the Talk button to open or close the
Talkback Settings window on the computer screen. Engaging Talk also dims the Control
Room circuit. You can modify the talkback functionality and general purpose input and
output (GPI/GPO) via the Talk Setup menu option keys in the Setup mode picture keys.
 MUTE: Use this button to mute the Studio monitors.
Monitor controls
Talkback Settings window, opened or closed by
pressing Control with the Talk button
Chapter – 162 Using the Fairlight Audio Editor 3344