User Manual

Pitch
An effects plug-in. Shifts audio pitch without altering clip speed.
The Pitch FairlighFX
Pitch has the following controls:
 Bypass: Toggles this plug-in on and off.
 Semitones: A “coarse” adjustment that can shift audio pitch up to +/- 12 semitones.
 Cents: A “fine” adjustment that can tune audio pitch in +/- 100ths of a semitone.
 Dry/Wet: A percentage control of the output mix of “dry” or original signal to “wet” or
processed signal. 0 is completely dry, 100% is completely wet.
Reverb
A spatial simulation plug-in, capable of recreating multichannel reverberation corresponding to
rooms of different sizes, adjustable via a graphical 3D cube control. This plug-in lets you take a
“dry” recording and make it sound as if it’s within a grand cathedral, an empty room, or a
tiled bathroom.
To understand this plug-in’s controls, it helps to know that the signal follows three paths which
are combined to create the final effect:
 A direct path.
 An early reflection path (ER) simulating early reflection rays obtained from the first
multiple reflections on the walls, traveling from the virtual source to the virtual listener.
 A late reverberation path (Reverb) simulating the behavior of an acoustic model
of the room.
A graph shows an approximate visualization of the reverb’s effect on the frequencies of the
audio signal.
Chapter – 159 FairlightFX 3310