User Manual

Meter has the following controls, all located in the option menu:
 Width: Lets you resize the width of the meter window. Options are: Narrow,
Normal, and Wide.
 Height: Lets you resize the height of the meter window. Options are: Small, Medium,
and Large.
 Reset Peak on Play: When enabled, the numeric peak level is reset every time
playback stops and starts again. When disabled, the numeric peak level persists until
changed by a higher peak.
 Reset: Resets the numeric peak level.
Modulation
An effect plug-in. General purpose modulation plug-in for sound fx/design. Four effects
combine an LFO, FM adjustment, AM adjustment, Sweep and Gain filters to allow simultaneous
frequency, amplitude and space modulation. In conjunction with the additional Rotation
controls, simple Tremelo and Vibrato effects can be combined with auto-filter and auto-Pan
tools in order to provide texture and movement to a sound.
An animated graph shows the results of adjusting the Modulator, Frequency, and Amplitude
parameters of this plugin, giving you a visualization of the kind of modulations that will be
applied to the signal as you make adjustments. Output meters let you see what level is
being output.
The Modulation FairlightFX
Modulation has the following controls:
 Bypass: Toggles this plug-in on and off.
 Modulator: A low frequency oscillator (LFO), shown in blue in the animated graph.
–
Shape: Specifies the shape of the LFO waveform that modulates the audio. Six
options include Sine, Triangle, Saw1, Saw2, Square, Random.
–
Rate (Hz): Adjust the speed of the modulating LFO. Lower settings result in warbling
audio, while extremely high settings result in buzzing audio the timbre of which is
dictated by the shape you’ve selected.
Chapter – 159 FairlightFX 3306