User Manual

 Frequency: Adjusts the center frequency of the EQ adjustment
 Gain: Adjusts the amount by which the affected frequencies are affected. Negative
values attenuate those frequencies, while positive values boost those frequencies.
Bands 2–5
The middle four sets of band controls let you make a wide variety of equalization adjustments.
They’re on by default, to make it easy to begin making adjustments.
The Band 3 controls
 Band enable button: Turns each band of EQ on and off.
 Band filter type: Bands 2–5 can be switched among four different filtering options
(from top to bottom) Lo-Shelf, Bell, Notch, and Hi-Shelf
 Frequency: Adjusts the center frequency of the EQ adjustment
 Gain: Adjusts the amount by which the affected frequencies are affected. Negative
values attenuate those frequencies, while positive values boost those frequencies.
 Q Factor: Adjusts the width of affected frequencies. Lower values include a wider
range of frequencies, higher values include a narrower range of frequencies
Dynamics
Double-clicking exposes a set of dynamics controls with three sets of controls corresponding to
an Expander or Gate, a Compressor, and a Limiter that can be used separately or in concert to
manage the dynamics of the audio on that track.
Chapter – 156 Mixing in the Fairlight Page 3253