User Manual

Table Of Contents
Insert
Enables the routing of effects from Blackmagic audio interface hardware to outboard effects
boxes and back again. This button can be toggled to enable/disable such routing.
EQ
Double-clicking exposes a four-band parametric equalizer with additional Hi and Lo Pass filters,
that has both graphical and numeric controls for boosting or attenuating different ranges of
frequencies of audio on each track. You can select from among four types of EQ filtering from
the Equalizer Type drop-down menu, with options for Earth (the default), Air, Ice, and Fire. Each
band has controls for the filter type (Bell, Lo-Shelf, Hi-Shelf, Notch), Frequency, Gain, and
Q-factor (sharpness of the band), with the available controls for each band of EQ changing
depending on the filter type.
The channel strip EQ window
When a channel strip’s EQ is enabled, the EQ button displays the equalization curve that’s
being applied. This indicator cannot be adjusted, you must open the EQ window to
makemodifications.
The channel strip’s EQ indicator,
(Left) EQ is adjusted, (Right) EQ is detent
Master EQ Controls
The Equalizer window has the following overall controls:
Enable button: Turns the overall EQ effect off and on, without resetting the controls.
Reset button: Resets all controls of the EQ window to their defaults.
Chapter – 156 Mixing in the Fairlight Page 3251