User Manual

Table Of Contents
To record a tone or noise from the Oscillator to an audio track:
1 Choose Fairlight > Patch Input/Output to open the Patch Input/Output window.
2 Choose System Generator from the Source drop-down menu, and choose Track Input
from the Destination drop-down menu.
3 At the left, click the button of what you want to output, Osc (Oscillator) or Noise.
4 At the right, click the connected audio outputs that you want to patch to, and click
Patch. Close the Patch Input/Output window.
5 Click the Arm Record (R) button in the track header of the track you patched the
Oscillator to. If your Main is properly patched to your outputs, you should hear the tone
or noise, and that track’s audio meter should immediately rise to the level being output
by the Oscillator.
6 Click the Record button of the transport controls to initiate recording of that tone to
the patched track. Click the Stop button or press the Spacebar to halt recording when
you’re done.
Pro Tools AAF Import
As of DaVinci Resolve 16, you can import AAF projects and media from Pro Tools, enabling you
to move an audio project from a Pro Tools workstation to a Fairlight workstation. AAF import
supports the import of embedded audio and track automation. To do so choose File > Import
Timeline > Import AAF/EDL/XML.
Dual Monitor Layout
The Audio page has a dual monitor layout that provides maximum space for the mixer and
audio meters on one screen and a full-screen timeline on the other.
To enter dual screen mode:
Choose Workspace > Dual Screen > On.
Chapter – 149 Using the Fairlight Page 3152