User Manual

 Sat Low Soft/High Soft: Two parameters let you define the upper and lower softness
falling off outside the current range of saturation.
 Lum Low/High: Two parameters let you define the upper and lower range of luma
being isolated.
 Lum Low Soft/High Soft: Two parameters let you define the upper and lower softness
falling off outside the current range of luma.
RGB Qualification Controls
The RGB Qualifier mode lets you isolate range and softness in the Red, Green, and Blue
channels of an image. While this is not necessarily an intuitive way of manually creating a
qualification from scratch, it can provide a different way of isolating potentially trickier ranges of
the RGB color space.
If you start by sampling the image, then you can widen and narrow each color channel’s isolated
range of values. In some cases, you may find it’s faster to isolate a specific range of continuous
color by adjusting these controls.
RGB qualification controls
The RGB parameters include:
 Red Low/High: Two parameters let you define the upper and lower range of the Red
channel being isolated.
 Red Low Soft/High Soft: Two parameters let you define the upper and lower softness
falling off outside the current range of red.
 Blue Low/High: Two parameters let you define the upper and lower range of the Blue
channel being isolated.
 Blue Low Soft/High Soft: Two parameters let you define the upper and lower softness
falling off outside the current range of blue.
 Green Low/High: Two parameters let you define the upper and lower range of the
Green channel being isolated.
 Green Low Soft/High Soft: Two parameters let you define the upper and lower
softness falling off outside the current range of green.
Chapter – 119 Secondary Qualifiers 2710