User Manual

Position X and Y
The X and Y values are used by the Position to generate the calculation.
Offset X and Y
The X and Y values are used by the Offset to generate the calculation.
Flip Position Horizontal and Vertical
When these controls are selected, the Position is mirrored along the vertical or horizontal axis
of the image.
Flip Offset Horizontal and Vertical
When these controls are selected, the Offset position is mirrored along the vertical or horizontal
axis of the image.
Mode
The Mode menu includes mathematical operations performed by the Offset control.
Available options include:
 Offset
 Difference (Position - Offset)
 Difference (Offset - Position)
 Average
 Use Position Only
 Use Offset Only
 Maximum
 Minimum
 Invert Position
 Invert Offset
 Invert Sugar
 Random Offset
Image Aspect
Adjust the modifier’s output to compensate for the image aspect (not pixel aspect) of the
project. A square image of 500 x 500 would use an Image Aspect value of 1, and a rectangular
image of 500 x 1000 would use an Aspect Value of 2. The default value is always based on the
current frame format selected in the preferences. To calculate image aspect, divide the width by
the height. This control can also be used to create the illusion of aspect.
Chapter – 111 Modifiers 2528