User Manual

Inspector
Controls Tab
The Controls tab contains parameters for selecting vector channels and controlling how much
distortion they apply to an image.
X Channel and Y Channel
These two menus are used to select which channel of the (green) distort image input is used to
distort the X and Y channels. If no distort reference image is connected, then channels from the
main orange input are used instead.
Flip Channel X and Flip Channel Y
Use these checkboxes to flip the direction of the distortion along the specified axis.
Lock Scale X/Y
Select this checkbox to separate the Scale slider into separate Scale X and Scale Y sliders.
Scale
Use the Scale slider to apply a multiplier to the values of the distortion reference image.
Lock Bias X/Y
Select this checkbox to separate the Bias slider into separate Bias X and Bias Y sliders.
Center Bias
Use the Center Bias slider to shift or nudge the distortion along a given axis.
Edges
This menu determines how the edges of the image are treated.
 Canvas: This causes the edges that are revealed by the shake to be the canvas color—
usually transparent or black.
 Duplicate: This causes the edges to be duplicated, causing a slight smearing effect at
the edges.
Glow
Use this slider to add a glow to the result of the vector distortion.
Chapter – 110 Warp Nodes 2500