User Manual

Table Of Contents
Process Mode.
Process Mode Menu
Full Frames: This forces Frame Processing. Useful for processing frames in a part of a
node tree that is otherwise field processing.
NTSC Fields: This forces NTSC Field Processing. Useful for processing fields in a part
of a node tree that is otherwise frame processing.
PAL Fields: This forces PAL Field Processing. Useful for processing fields in a part of a
node tree that is otherwise frame processing.
PAL Fields (Reversed): This forces PAL-swapped Field Processing.
NTSC Fields (Reversed): This forces NTSC-swapped Field Processing.
Auto: This attempts to match the mode of its input images. Fields are used if the input
types are mixed.
Common Controls
Settings Tab
The Settings tab in the Inspector is also duplicated in other miscellaneous nodes. These
common controls are described in detail at the end of this chapter in “The Common
Controls” section.
Frame Average [Avg]
The Frame Average node
Frame Average Node Introduction
The Frame Average node averages together a series of frames to simulate clips shot with long
shutter speeds. Aside from motion blur-style effects, it can be useful for time warps or
noise removal.
Inputs
The single input on the Frame Average node is used to connect a 2D image that will have the
averaging applied.
Input: The orange input is used for the primary 2D image that will be averaged.
Chapter – 100 Miscellaneous Nodes 2221