User Manual

Color Space Type
This menu is used to set the Color Space of the footage to help achieve a linear color space
workflow. Unlike the Gamut tool, this doesn’t perform any actual color space conversion, but
instead adds the source color space data into the metadata, if that metadata doesn‘t already
exist. The metadata can then be used downstream by a Gamut tool with the From Image option,
or in a Saver if explicit output spaces are defined there.
 Auto: Passes along any metadata that might be in the incoming image.
 Space: Allows the user to set the color space based on the recording device used
to capture content or software settings used when rendering the content in another
application.
Curve Type
This menu is used to determine the gamma curve of the footage. Once the Gamma Curve Type
is set, you can choose to remove the curve to help achieve a linear workflow.
 Auto: Passes along any metadata that might be in the incoming image.
 Space: Allows the user to set the gamma curve based on the recording device used
to capture content or software settings used when rendering the content in another
application.
 Log: Displays the Log/Lin settings, similar to the Cineon Log node. For more information
on the Log settings, refer to Chapter 36, “Film Nodes” in the Fusion Studio Reference
Manual or Chapter 84 in the DaVinci Resolve Reference Manual.
Remove Curve
Depending on the selected Curve Type or on the Gamma Space found in Auto mode, the
associated Gamma Curve is removed from, or a log-lin conversion is performed on, the material,
effectively converting it to a linear output space.
Format tab
Chapter – 94 I/O Nodes 2071