User Manual

Table Of Contents
L3 tab
Lens Reflect Tabs
The three Lens Reflect tabs are used to enable and design additional lens flare elements
beyond the primary and secondary hot spots.
Lens Reflect 1-3
Each of these three checkboxes enables a pair of lens reflection elements that you can modify
using the controls in this tab. The parameters affect all the enabled Lens reflection elements
in this tab.
Element Strength
This determines the brightness of element reflections.
Element Size
This determines the size of element reflections.
Element Position
This determines the distance of element reflections from the axis. The axis is calculated as a
line between the hot spot position and the center of the image.
Element Type
Use this group of buttons to choose the shape and density of the element reflections. The
presets available are described below.
Circular: This creates slightly soft-edged circular shaped reflections.
Soft Circular: This creates very soft-edged circular shaped reflections.
Circle: This creates a hard-edged circle shape.
NGon Solid: This creates a filled polygon with a variable number of sides.
Chapter – 88 Effect Nodes 1954