User Manual

Table Of Contents
Editing Paint Strokes in the Modifiers Tab
When you paint a stroke, the settings for that stroke appear in the Inspector’s Modifiers tab. You
can then change the settings in the Tools tab for the next stroke you are about to paint. Each
time you click, drag, and release the pointer button, you create a new stroke. Each stroke is
numbered in the Modifiers tab, where it can be selected and edited.
Each stroke is listed in the Modifiers tab for editing.
Once you stop painting a stroke, it’s added to the Modifiers tab along with an additional Stroke
modifier that represents the next stroke. For instance, if you paint your first stroke, the Modifiers
tab shows your stroke as Stroke1 and then a stroke 2 as well, which represents the next stroke
you create. You always have one more stroke in the Modifiers tab than strokes in the viewer.
Deleting Strokes
There are two ways you can delete paint strokes.
To delete any individual stroke, do the following:
1 Select the Paint node.
2 Click the Modifiers tab.
3 Right-click over the Stroke header you want to delete and choose Delete
from the menu.
To delete all paint strokes you’ve made on every frame, do one of the following:
Click the reset button in the upper-right corner of the Inspector.
Delete the Paint node in the Node Editor.
Chapter – 72 Paint 1468