User Manual

Table Of Contents
Program Layout
The Program Layout is used to save the overall Fusion interface window and any open floating
windows. Each new composition you open within the lager overall Fusion interface window will
adhere to these preferences.
Grab Program Layout: Pressing this button stores the application’s overall current
position and size.
Run Mode: This menu is used to select the application’s default mode at startup.
You choose between a Maximized application window, a Minimized application, or a
Normal application display.
Use the Following Position and Size: When checked, the values stored when Grab
Program Layout was selected will be used when starting Fusion Studio.
Create Floating Views: When checked, the position and size of the floating viewers will
be saved when the Grab Program Layout button is used.
Document Layout
The Document Layout is used to save the layout of panels and windows for the current
Fusion comp.
Recall Layout Saved In Composition: When checked, all Document Layout settings in
the controls below will be recalled when a saved composition is loaded.
Grab Document Layout: Pressing this button stores the entire interface setup, including
all the internal positions and sizes of panels and work areas.
Window: When multiple windows on the same composition are used, this menu is used
to select the window to which the Window Settings will apply.
Window Settings
Rather than saving entire comp layouts, you can save position and size for individual floating
windows and panels within a comp using the Window Settings.
Automatically Open This Window: When checked, the selected window will
automatically be opened for new flows.
Grab Window Layout: Pressing this button stores the size and position of the
selected window.
Run Mode: Select the default run mode for the selected window. You can choose
between a Maximized window, a Minimized window, or a Normal window display.
Use Grabbed Position and Size: When checked, the selected window will be created
using the stored position and size.
Loader
The Loader preferences are only available in Fusion Studio. Using the Loader preferences, you
can set options for the default Loader’s color depth and aspect ratio as well as define the local
and network cache settings.
Chapter – 66 Preferences 1327