User Manual

TIP: Due to the design of the AVX2 standard, hidden embedded handles are not
supported. To add handles, prior to exporting to Fusion, increase the length of your
clip in the Media Composer Timeline to include the handle length.
Fusion Node Editor representations of a single clip segment effect in the Media Composer Timeline (left), a
multi-layered composite (center), and the transition (right).
TIP: If segments in the Avid Timeline have different durations, move the longest clip to
the top layer and apply Fusion Connect to that clip. This will ensure all clips are
brought into Fusion without being trimmed to the shortest clip.
Fusion/AVID Project Relationship
The frame rate and image size preferences created in Media Composer are adopted within
Fusion’s frame rate preferences. This allows for consistency in formats for the roundtrip process
from Avid to Fusion and back to Avid. The format settings do not prevent you from using or
mixing any other sized imaging within the composition as Fusion is resolution independent.
Fusion Connect AVX uses frame rate and
resolution from the Media Composer Timeline.
Chapter – 65 Fusion Connect 1304