User Manual

Table Of Contents
The Layer Input Dialog
When you apply the Fusion Connect AVX plug-in to a clip or a layer in the Timeline, you are
presented with an AVX Optional Inputs dialog box.
The Fusion Connect AVX plug-in can access
multiple layers from the Media Composer Timeline.
Once the layer count is selected, Fusion Connect will be applied to the Timeline.
Select the layer count equal to the number of video track layers you want to
ingest into Fusion.
Filler can be used as a layer.
Fusion Connect will allow a maximum of eight layers.
Applying Fusion Connect to a
Transition Point
If you apply Fusion Connect to a transition point, no dialog box will display, and the
AVX plug-in will simply be applied to the Timeline transition point.
A Fusion Connect AVX plug-in
applied as a transition to a cut in
the Timeline.
You can use the Avid dialog boxes or smart tools to adjust the length and offset of
the transition to Start, Center, End, or Custom.
Export Clips
By pressing the Export Clips button in the Effects Editor, Fusion Connect exports all the
associated clips as image sequences, to provide access to them in Fusion. Any previously
exported existing images are overwritten, ensuring that all media needed by Fusion is
accessible. Performing an export is desired if you want to use Fusion on a different computer
than the one with Media Composer installed.
Chapter – 65 Fusion Connect 1299